There are a few things you can do to ensure your Heine ophthalmic equipment is capable to handle your rising number of patients and high usage.

Love your HEINE tool and it will love you back. The pieces included in your tool are extremely sensitive, and can have extremely delicate components. Ensure that each time you use the tool; you are just using it in the advised manner, with the right steps and protocol for operation, otherwise you will quickly find yourself in the need for a Heine ophthalmoscope repair.

Put instruments back in their allotted areas, rather than leaving them lying on desks or in pockets.

Care for optical surfaces. These surfaces can contain the prisms, mirrors, beam splitters, lenses, windows, and glass plates on many pieces of ophthalmic tool, which have generally had extensive preparations. The surfaces are very polished to stop any irregularities or warping, and some pieces are then coated to make sure that the surface is optimally prepared for use.

Heine Ophthalmoscope cleaning of general equipment components
Movable parts should be kept clean of oil with an engine oil or micro oil, and lubricated with white silicone grease or singer machine oil. It is vital to follow producers advises and recommendations for the care of each piece and part.

Fuses: These are used to keep power currents from being overloaded, so it is vital to ensure that you use right amperage for each piece of equipment. This means no swapping out quick-blow and slow-blow fuses, and never bypassing the fuses. You should forever keep extra fuses with the right amperage near each piece of tool.

Cords: Never pull the cords from the power source by wire itself, so that can destroy the cords. Ensure to regularly check cords for corrosion, if any corrosion is found, file or scrape it from the cord contact points.
Bulbs: Ensure to keep your voltages at the lowest possible setting. Where there is a surge you danger the burst of power blowing out the bulbs. Try to keep these settings as low as easy, when the piece are in use. If you have the lamps on, mainly in pieces like microscopes, do not move the tool, as even slight action can break or crack the bulb filament.

Power sources: There are many different power sources you may find yourself using regularly. If you are using a wall socket, ensure that your tool has the same voltage, otherwise seek out a right transformer. Use surge protector for computerized tool, and consider a voltage stabilizer when right.

If everything else fails and you come across a HEINE ophthalmoscope repair, Ophthalmon is the only company you need to contact. The level of professionalism shown, as well as understanding that your time is precious, makes us the best available partner for ophthalmoscope repairs.

Showing all 4 results

Heine Beta 200 Ophthalmoscope

As an international leader in the manufacture of diagnostic tools with over five-hundred employees, Heine Optotechnik has been a hundred percent family owned and managed firm for more than seventy years. They continue to develop and produce HEINE instruments at facilities in Germany, where they gather decades-long experience and craftsmanship with the most new producing technologies. Beta 200 Heine Ophthalmoscope features The patented Aspherical optical system incorporated into the BETA 200 design represents the single largest breakthrough in direct Ophtalmoscopy since coaxial optics were introduced more than twenty years ago. The separation of illumination and observation beam by means of the Aspherical Optical system rejects Iris reflex and Corneal. The Beta 200 permits you to view the planet of the illuminated section of the retina even with a little pupil. Conventional Ophthalmoscopes generally allow you to view only part of this illuminated section.
  • Specs a special optical system with aspherical optics. Corneal and iris reflexes are eliminated.
  • XHL Xenon Halogen bulbs for right colour bright and rendering, clear illumination
  • Maintenance-free dust-proof housing.
  • Mounted on a metal chassis for precision and durability
  • Recessed multi-coated viewing window
  • Precision spherical HEINE optics generate amazing standard images of the full area under check

Heine Beta 200s Ophthalmoscope

Exclusive dustproof design saves the precision optical parts and makes sure maintenance-free operation. The BETA 200S ophthalmoscope is the only tool with an aluminum frame system. Optical parts are flush-mounted on a cast aluminum frame, eliminating misalignment and making the tool shock-resistant. Range of lenses: Twenty-seven lenses from -35D to + 40D. Without macula aperture. Exclusive continuous brightness control between hundred percent and three with one-finger operation. No stray light due to the multi-coated and recessed viewing window. Precise one-hard control of the tool. Ergonomic design provides flexibility while checking. Perfect for big as well as little undialted pupils. Ergonomic design fits the orbita happily, and blocks out ambient light. Due to the best design and standards of HEINE tools, they are easy to perform Beta 200s Heine Ophthalmoscope repair and to disinfect them. HEINE offers simple to follow instructions, along with most versatile processes for disinfection. HEINE tools are sealed, which permit us to advise quaternary ammonium compound wipes for disinfection. These wipes are largely compatible with tool in your exam room, low odor, fast acting and non-corrosive.

Heine K180 XHL Ophthalmoscope

An Ophthalmoscope is handled gadget used to check your eyes interior structure, including the retina. While an ophthalmoscope may look similar to the retina scope, it has different objective. This is a handheld gadget and easy to do  K180 XHL Heine Ophthalmoscope repair that gathers a light source with built-in lenses and mirrors so that your eye doctor can check the interior structures of the eye. An ophthalmoscope is particularly helpful for checking the structures of the retina - the light sensitive place at the back of the eye responsible for processing images. Traditionally part of almost every eye exam, ophthalmoscopes can check fit structures within the eyeball, and simply help your eye doctor view symptoms or indictor of diseases of the eye. In some examples, your eye doctor will use an indirect ophthalmoscope to gain a bigger view of your eyes internal structure, mainly the retina. While indirect ophthalmoscopes, your eye doctor was head visor that projects a bright light. By gripping different handheld lenses in front of your eye, your doctor can excellent view, and magnify, the inside of your eye. How does an ophthalmoscope work? Your eye doctor will dim the lights of the room and ask you to target on a fixed point on a far wall. Using indirect and direct ophthalmoscopes your eye doctor will check the structure of your eye. Sometimes, unique drops are used to "open up" your pupils to help your eye doctor in the exam. Your eye doctor is looking for signs of a fit retina, and also for indictors of any number of potential eye issues like muscular or cataracts degeneration.

Heine Mini 3000 Ophthalmoscope

The HEINE mini 3000 ophthalmoscope is a top standard ophthalmoscope with fixation star aperture in pocket format. Standard optics in little format. Perfect for house calls and rounds. Can only be used with the mini 3000 handle system.
  • Dustproof construction
  • A big range of filters and apertures
  • Standard HEINE optics for high resolution views of the retina
  • Brightness can be reduced by using star fixation with grey filter
  • Best color rendering, even for red colors
  • Optimum brightness for ophthalmic checks
HEINE LED illumination specs: Color rendering: the latest HEINE mini 3000 tools with LED illumination generates a color rendering value for more than ninety-five and an individual value for red colors of more than ninety, ensuring red is red, blue is blue. Homogeneity: The integrated light modules and apertures offers an absolutely homogenous illuminated light place. The light fall-off to the edge is so now that it cannot be perceived by the human eye. Light intensity: To be capable to discern even the slightest abnormalities, it is important to rightly illuminate the object being checked. It is not a question of utilizing the brightness LED accessible, but utilizing the best LED and combining it with the optical system of the tool to get the optimum brightness for the check. This is promised with all LED tools.